| LLS-09 anti-ant products developed by our company are mainly composed of a variety of pyrethrins and carbamate. Its appearance is white powder, melting point: 86-90℃, decomposition temperature ≥200℃, stable to light and heat. The product has been tested by EU ROHS directive and SVHC for high concern chemicals. It is a kind of low toxicity, high efficiency, long half-life of anti-ant agent, has a strong touch effect, strong knockdown force, rapid efficacy, prevention and control termites is particularly effective. Widely used in PVC and low smoke halogen-free plastic coating. Recommended dosage: 0.6-1.0%  Notes: 1.As LLS-09 anti - ant products have certain toxicity, do a good job of protection when using. 2.In contact with skin, rinse thoroughly with soap and water. Storage: The product is sealed and stored in a cool, dry and ventilated place. The mechanical properties of termite resistant PVC coating plastic were tested as follows: 
	
		
			| Testing item  | Standard required  | Testing result  | Single conclusion |  
			| 1.Mechanical properties tensile strength before aging (N/mm2) | ≥12.5 | 19.7 | qualified |  
			| Elongation at break (%) | ≥150 | 300 | qualified |  
			| 2.Air tank after aging |   |   |   |  
			| Temperature (℃) 100±2, times (h)168 |   |   |   |  
			| Tensile strength (N/mm2) | ≥12.5 | 21.7 | qualified |  
			| Rate of change (%) | ≤±25 | +9.7 | qualified |  
			|    Elongation at break (%) | ≥150 |  350 | qualified |  
			| Rate of change (%) | ≤±25 | 16.6 | qualified |  
			| 3.Thermo-gravimetric experiment |   |   |   |  
			| Temperature (℃)80±2, times (h)168 |   |   |   |  
			| Weightlessness (%) | ≤2.0 | 0.34 | qualified |  
			| 4.Cracking test |   |   |   |  
			| Temperature (℃)-, times (h)- |   |   |   |  
			| Testing result  | no cracking | no cracking | qualified |  
			| 5.High temperature pressure test |   |   |   |  
			| Temperature (℃)80±2, times (h)4 |   |   |   |  
			| Deformation rate (%) | ≤50 | 22 | qualified |  
			| 6.Low temperature impact test |   |   |   |  
			| Temperature (℃)-15±2 |   |   |   |  
			| Testing result  | no cracking | no cracking | qualified |  Extrusion process is stable, fast exit speed, uniform plasticization, smooth surface, no visible air holes, no peculiar smell. |